Universal dimmer, 1-channel RFDEL-71M

1x 600 VA
 
EAN: 8595188148979 (230V) | Code: 4897 (230V)

DESCRIPTION

  • The universal modular dimmer is used to regulate light sources:
    R – classic lamps (resistive load)
    L – halogen lamps with wound transformer (inductive load)
    C – halogen lamps with electronic transformer (capacity load)
    ESL – dimmable energy-effi cient fluorescent lamps
    LED – LED light sources equiped with LED.
  • Control can be performed by:
    a) detectors, Controllers and System units iNELS RF Control
    b) by control signal 0(1)-10 V
    c) potentiometer
    d) existing button in the installation.
  • 6 light functions - smooth increase or decrease with time setting 2 s -30 min.
  • Thanks to setting the min. brightness by potentiometer, you will eliminate flashing of the LED and ESL light sources.
  • The universal dimmer may be controlled by up to 32 channels.
  • The programming button on the controller is also used for manual control of the output.
  • The package includes an internal antenna AN-I, in case of locating the unit in a metal switchboard, you can use the external antenna AN-E for better signal reception.
  • Memory status can be pre-set in the event of a power failure.
  • Range up to 160 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
  • Communication frequency with bidirectional protocol RFIO2.
  • The unit‘s three-module design with switchboard mounting.

TECHNICAL PARAMETERS

  • Output: R - L - C - LED - ESL, 600 VA (230V); 300 VA (120V)
  • Supply voltage (frequency): AC 230 V (50 Hz);  AC 120 V (60 Hz)
  • Design: 3-MODULE 
  • Dimensions: 90 x 52 x 65 mm
  • Protocol: RFIO2

Downloads

Wichtige Kontaktpersonen

Bestellungen

+49 (0) 221 222 837 80
elko@elkoep.de

Technische Unterstützung

+49 (0) 221 222 837 80
krejci@elkoep.de