Switch unit RFSAI-62B-SL

DESCRIPTION
Switching element with one / two output relays used to control appliances and lights.  1 / 2 existing push buttons can be connected to the internal terminals in  
wiring.
- It can be combined with Detectors, Controllers or System Elements iNELS RF Control.
- The BOX version offers installation directly into the installation box, ceiling or housing of the controlled appliance.  Easy installation thanks to screwless terminals and zero and phase connections
- Allows connection of switching loads with a total of 8 A (2,000 W).
- Functions: push-button, impulse relay and delayed start-up or return time functions with 2 s-60 min time setting. Any function can be assigned to each output relay. For the RFSAI-11B-SL, the ON/OFF function can be assigned to any relay.
- The external pushbutton is assigned in the same way as the wireless pushbutton.
- Each output can be controlled by up to 12/12 channels (1 channel represents one button on the controller). For RFSAI-61B-SL and RFSAI-11B-SL up to 25 channels.
- The programming button on the element also serves as a manual output control.
- Memory status can be set in case of power failure.
- The repeater function of the elements can be set via the RFAF/USB service device.
- Range up to 200 m (in open area), in case of insufficient signal between the controller and the element use the signal repeater RFRP-20 or elements with RFIO2 protocol that support this function.
- Communication with iNELS RF Control2 bidirectional protocol (RFIO2)

TECHNICAL PARAMETERS
Output: 2x switching, 8A
Power supply (frequency): AC/DC 12-24 V (50/60 Hz), AC 120 V (60 Hz) or AC 230 V (50/60 Hz)
Design: BOX
Dimensions: 43 x 44 x 22 mm 
Protocol: RFIO2

Downloads

• Datasheet RFSAI-61B-SL, RFSAI-62B-SL, RFSAI-11B-SL

  Format: pdf | Size : 560 kB | 02. 10. 2022