Central unit CU3-06M

Description

• CU3-05M and CU3-06M are the new central units of the iNELS system and are an intermediary between the user programming environment and controllers, units and actuators connected to the bus.
• Up to two BUS lines can be connected directly to the CU3-05M and CU3-06M, and up to 32 iNELS3 units can be connected to each BUS.
• With the new processors you can manage your complex tasks literally instantly.
• Additional units can be connected to the system via MI3-02M expansion modules, which are connected to the CU3-05M (06M) via the EBM system bus.
• Additional units can be connected to the system via MI3-02M/ETH expansion modules, which are connected to the CU3-05M (06M) via Ethernet.
• The CU3-06M central unit differs from the CU3-05M in that it is additionally equipped with an RF module enabling communication with selected units from the iNELS RF Control system.
• The user project and retentive data are stored on non-volatile internal memories and the data is therefore backed up even without the presence of supply voltage. Real time backup (RTC) for 10 days.
• Possibility to set time synchronization via NTP server.
• The RJ45 Ethernet port connector is located on the bottom of the unit; the transfer rate is 100 Mbps.
• CU3-05M, CU3-06M in 6-MODULE version are designed for mounting in a switchboard on DIN rail EN60715.

Technical parameters 

•  Supply voltage/tolerance: 27 V DC, -20/+10 % 
•  Degree of protection: IP20 devices, IP40 with cover in the switchboard 
•  Installation: to the switching board on the EN60715 DIN rail
•  Design: 2x 6-MODULE 
•  Dimensions: 90 x 210 x 65 mm 
• Weights: 457 g